Miele TOUCHTRONIC T 8012 C User Manual download pdf (Page 34)

Installation beneath a counter

,

When the machine lid needs to

be removed to reduce the height of

the machine, a built-under spacer

kit* is necessary.

It must be installed by a Miele

Service Technician.

The cover plate of the built-under kit

replaces the appliance lid and

ensures electrical safety.

An installation manual is supplied with

the built-under spacer kit.

The electrical connection should be

near the dryer and accessible at all

times.

Extended machine feet* are

recommended at a built-in height of

more than 33

1

/

16

" (840 mm).

^ Set the extended machine feet on a

height of 1

9

/

16

" (40 mm).

Remove the original machine feet

and replace them with the extended

ones.

One or two filler frames* are

recommended at a niche height of

34

1

/

4

" / 34

13

/

16

" to 36" / 36

5

/

8

"

(870/885 - 915/930 mm).

* (optional accessory)

An existing continuous toe kick must

be interrupted at the dryer location!

Reinstallation of the machine lid

When reinstalling the appliance lid,

check the firm fit of the cover at the rear

bracket for a safe transport of the dryer.

Installation

30

1 ... 33 34 35 36 37 38 39 40

Comments to this Manuals

No comments