Miele K 1901 Vi Operations Instructions download pdf (Page 59)

An alternative anti-tipping

mechanism

If it is not possible to fix the anti-tipping

mechanisms securely to the floor of the

niche, the appliance can be secured at

the top using a wooden beam. If this

method is used, then there must not be

any gap between the appliance and the

wooden beam.

–

The wooden beam must be at least

75 mm x 100 mm thick.

–

The length must be the same as the

width of the building-in niche.

–

If the building-in niche is deeper than

the appliance, a thicker wooden

beam should be used.

–

The wood must cover the appliance

to a depth of at least 50.8 mm (see

diagram).

Mark the position of the lower edge of

the wooden beam on the rear wall of

the niche.

Select screws of a length depending

on the thickness of the wood.

Use the number of screws

appropriate to the housing width to

ensure that the wooden beam is

securely fixed.

Check where the upright wall

supports are in the back of the niche,

and mark the drill holes in the

wooden beam accordingly.

^ First, drill the holes in the wooden

beam.

^ Secure the wooden beam to the back

wall of the niche.

Installation

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 71 72

No comments

Miele K 1901 Vi Operations Instructions Page 59