Miele G 7823 Operations Instructions download pdf (Page 11)

Electric door lock

The machine is equipped with an

electric door lock.

The door can only be opened when:

^

the machine is connected electrically

^

the main switch I-0 is on.

To open the door a

^

Press the door button in fully and at

the same time pull open the door.

,

Do not touch the heating

elements if you open the door during

or directly after the end of a

program. The heating elements

remain hot for some time after the

end of a program.

To close the door

^ Lift the door upwards until it clicks

into position. Do not push in the door

release button as you do so.

The door is locked approx. 1.5 mins.

after program start, except in the

program D (PRE-RINSE),

6 (DRAIN) and during the drying

phase (additional program).

The door remains locked until the end

of the program, when it can be opened

again.

Cancelling a program

If a program has to be cancelled in

extreme cases, e.g. when articles in the

machine jostle against each other or the

program is interrupted with a fault

indication, the door must be opened

(deliberate intervention):

^

Turn the program selector switch to f

(the program is cancelled after approx.

2 secs.).

Important: Further procedures are

described in the section “Switching on

and off” under “Cancelling a program”.

Opening the door with the

emergency release

The emergency release should only

be used when the door cannot be

opened normally (e.g. power failure).

^ Turn the program selector switch to f.

^ Switch off the machine (I-0 switch).

^

Pull down the emergency release

behind the door outer panel.

Opening and closing the door

11

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 51 52

Comments to this Manuals

No comments