Miele G 7823 Operations Instructions download pdf (Page 28)

Switching on

Close the door.

Open the stopcocks (if turned off) .

^ Press the I-0 button.

When the program selector is at the f

“STOP” position a point lights up in the

display.

Starting the program

^ Turn the program selector clockwise

or anti-clockwise to the required

program.

The wash temperature of the

selected program is shown in the

display, except with D (PRE-RINSE)

and 6 (DRAIN).

Select additional function 3

(DRYING) if required, (see “Selecting

an additional function”).

Press the 6 “Start” button. The

display will now show the actual

temperature.

The indicator light next to the “Start”

button comes on.

Once the program has started, all other

programs are blocked. If the program

selector is then turned to another

program, the values shown in the

display go out. The values can be seen

again only if the program selector is

turned back to the position of the

program currently in operation.

^ Press the 4 button to alternate the

display between elapsed time and

actual temperature.

Note that during the heat-up stage in

“Main wash” and “Final rinse” the

desired temperature is shown in the

elapsed time display.

Switching the machine on and off

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 51 52

No comments

Miele G 7823 Operations Instructions Page 28