Miele DA 3560 Service Manual download pdf (Page 27)

a 1 exhaust socket

for exhaust ducting C 150 mm.

b 1 reducing collar

for exhaust ducting C125 mm.

c 1 non-return valve

for fitting into the exhaust socket (not

for recirculation mode).

d 2 covers

for the brackets

e 2 brackets

to support the appliance in the wall

unit.

f 2 retaining brackets

for additional aligning and securing

of the cooker hood in a 900 mm wide

unit (DA 3590 only) .

g 1 cover

for the charcoal filter slots.

h 1 spacer strip

to conceal the gap between the rear

of the appliance and the wall.

i Conversion kit for recirculation

mode

(this is not supplied, but is available

as an optional accessory - see

"Technical data").

The kit contains an exhaust grille and

flexible aluminium hose with clips.

12 screws4x15mm

for securing the cooker hood into the

wall unit.

4 screws M4 x 16 mm

for securing the cooker hood to the

brackets and for securing the spacer

strip.

4 screws M4x8mm

for securing the spacer strip.

2 screws4x40mm,

2 plugs6x36mm

for additional securing of the cooker

hood to the wall (only when fitting the

DA 3590 into a 900 mm wide unit).

4 screws4x25mm

for additionally securing the DA 3590

into a 600 mm wide unit.

4 adhesive covers

to conceal the fixing holes which are

not required (DA 3590 only).

1xT20angled key

Installation

27

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 43 44

Comments to this Manuals

No comments