Miele DA 3560 Service Manual download pdf (Page 32)

^ Fit the cooker hood into the wall unit

from below, guiding it over the safety

notch, as shown. Push it back until

the spacer strip is flush with the wall.

Pull the deflector plate downwards

slightly and then towards you.

Tighten the four securing screws

from below.

When fitting a 900 mm wide cooker

hood in a 600 mm wide wall unit,

insert the two rear screws at this

stage. In this instance you will also

need to secure it to the base on

either side.

Push the deflector plate back in.

Installation

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 43 44

No comments

Miele DA 3560 Service Manual Page 32