Miele Ventilation Hood Operations Instructions download pdf (Page 25)

All electrical work should be

performed by a qualified electrician

in strict accordance with national

and local safety regulations.

Installation, repairs and other work

by unqualified persons could be

dangerous. The manufacturer can

not be held responsible for

unauthorized work.

Ensure that power to the appliance

is OFF while installation or repair

work is performed.

Verify that the voltage, load and circuit

rating information found on the data

plate (located behind the grease

filters), match the household electrical

supply before installing the hood.

If there is any question concerning the

electrical connection of this appliance

to your power supply, please consult a

licensed electrician or call Miele’s

Technical Service Department.

U 1-800-999-1360

V 1-800-565-6435

WARNING:

THIS APPLIANCE MUST BE

GROUNDED

Important

The hood must be hard wired

accordingly:

Black/Red wire:. . . . connect to L1 (live)

White wire: . . . . . connect to N (neutral)

Green wire: . . connect to GND (ground)

Maximum load. . . . . . . . . . . . . . . 430 W

Lighting . . . . . . . . . . . . . . . . . . 4 x 20 W

Voltage . . . . . . . . . . . . . . . . . . . . . 120 V

Frequency . . . . . . . . . . . . . . . . . . 60 Hz

Circuit rating. . . . . . . . . . . . . . . . . . 15 A

Electrical data

1 ... 24 25 26 27 28 29 30 31 32

No comments

Miele Ventilation Hood Operations Instructions Page 25