Miele Ventilation Hood Operations Instructions download pdf (Page 29)

Danger of toxic fumes.

Gas cooking appliances release

carbon monoxide that can be

harmful or fatal if inhaled. The

exhaust gases extracted by the

hood should be vented outside of

the building only

.

Do not terminate the exhaust

ducts in attics, garages,

crawlspaces, etc.

Please read and follow the "Important

Safety Instructions" to reduce the risk

of personal injury. Follow all local

building codes when installing the

hood.

Exhaust ducting and connections

– The ducting should be as short and

straight as possible, and the number

of sharp bends should be minimized.

– For most efficient air extraction, the

diameter of the ductwork should not

be less than 6" (150 mm). Use of flat

ducts also reduces the air extraction

efficiency.

–

Noise levels of the hood will increase

if flat or round ducts of less than 6"

(150 mm) in diameter are used.

,

WARNING

To reduce the risk of fire only use

metal ductwork.

CAUTION

To reduce the risk of fire and to

properly exhaust air, be sure to duct

air outside. Do not vent exhaust air

into spaces within walls or ceilings

or into attics, crawl spaces, or

garages.

–

Use smooth or flexible pipes made

from approved non-flammable

materials for exhaust ducting.

– Where the ductwork is horizontal, it

must slope away from the hood at

least

1

/

8

" per foot (1 cm per meter) to

prevent condensation dripping into

the appliance.

– If the exhaust is ducted through an

outside wall, a Miele Telescopic Wall

Vent can be used.

Air extraction

29

1 ... 28 29 30 31 32

Comments to this Manuals

No comments