Miele Ventilation Hood Operations Instructions download pdf (Page 28)

Installation accessories

4 Screws 8 x 60 mm with

4 Washers

(S10 wall anchors included in the

packaging are not for use in USA / CDN)

2 spring clips to hang the hood onto

the mounting plate

4 Flat head screws M 6 x 20 mm with

nose and

4 M 6 locking nuts for securing the

motor assembly

1 hose clip for securing the ducting

Installation instructions

See the enclosed installation instruction

sheet.

Please read the "Important Safety

Instructions" and Installation

instructions before installing this hood.

Recirculation mode

If site conditions are not suitable for the

hood to be used for air extraction, the

appliance must be converted for

recirculation.

For recirculation mode a conversion kit

must be installed, available from Miele.

The conversion kit comes with am

Installation manual.

After the hood is installed the charcoal

filter must be inserted and the charcoal

filter timer must be set. See "Cleaning

and Care" and "Operation".

Installation

28

1 ... 27 28 29 30 31 32

Comments to this Manuals

No comments