Miele W 4449 WPS LIQUIDWASH Operations Instructions download pdf (Page 43)

Cleaning the dispensing unit

The container should be cleaned each

time you change brand of liquid

detergent.

Cleaning the container and lid

,

Do not use solvents, abrasive

cleaners, glass cleaners or

all-purpose cleaning agents.

These might damage plastic

surfaces and other components

because of the chemicals they

contain.

^ Remove the container from its base.

^ Remove the lid.

^ Rinse the container with hot water to

remove any detergent residues.

^ Clean the container and lid with a

mild non-abrasive cleaning agent or

soap and water. Wipe dry with a soft

cloth.

^

Clean the valve in the bottom of the

container.

Remember to reset the detergent

dosage level if you change brand of

liquid detergent.

Cleaning the dispensing tube

It is not normally necessary to clean the

dispensing tube.

After refitting the container, sufficient

detergent for 2-3 washes will still be in

the system. After that the new detergent

will be used.

However if you have had any problems

with the old detergent (e.g. you have

had to change brand because of an

allergic reaction), you will have to

dismantle the dispensing tube and

rinse it out thoroughly.

After cleaning, the dispensing tube

must be primed with detergent again

and the dosage level must be set. See

"Before using for the first time

- Priming the liquid detergent

dispensing system" and "Liquid

detergent dispensing - Dosage level".

Cleaning and care

43

1 ... 42 43 44 ... 80

Comments to this Manuals

No comments