Miele W 4449 WPS LIQUIDWASH Operations Instructions download pdf (Page 49)

General problems

Problem Possible cause Remedy

The machine shakes

during the spin cycle.

The machine feet are not

level.

Level the machine (see

"Installation).

The laundry has not

been spun properly and

is still wet.

The machine detected an

imbalance during the final

spin and reduced the

spin speed automatically.

Include both large and

small items in the load as

this will give better

distribution.

The laundry has not

been spun satisfactorily.

The spin speed selected

was too low.

Select a higher spin

speed next time.

The pump makes

strange noises.

This is not a fault! These noises occur at the end of

a pump sequence as a normal part of the operation.

There is a lot of

detergent residue in the

detergent drawer.

The water pressure is too

low.

– Clean the water inlet

filter.

– Select Water plus.

Powder detergent used

with water softeners can

be sticky.

Add washing powder

and then add the water

softener.

Fabric conditioner is not

completely dispensed or

too much water remains

in the § compartment.

The siphon tube is not

correctly positioned, or is

clogged up.

Clean the siphon, (see

“Cleaning and care" -

"Cleaning the detergent

dispenser drawer”).

The display is in a

different language.

A different language has

been selected in Settings

Language J.

Set the language you

want. The flag symbol

will guide you.

When laundry is dry it

feels hard to the touch.

Too vigorous wash

action.

Programme in gentle

action and more water.

Not enough detergent

used.

Increase detergent dose

to prevent limescale

build up in laundry.

No fabric conditioner

used.

Use fabric conditioner in

last rinse.

Problem solving guide

1 ... 48 49 50 ... 80

Comments to this Manuals

No comments

Miele W 4449 WPS LIQUIDWASH Operations Instructions Page 49

Comments to this Manuals

Related products and manuals for Washing machines Miele W 4449 WPS LIQUIDWASH