Problems with the automatic liquid detergent dispensing
system
Problem Possible cause Remedy
No liquid detergent
has been dispensed.
The liquid detergent
container and tube are
empty.
Add liquid detergent to the
container and fill the tube with
liquid detergent as described
in "Before using for the first
time - Priming the liquid
detergent dispensing system".
Make sure you remember to
refill the liquid detergent
container in good time.
The tube is kinked or
squashed.
Position the tube so that it is
free of kinks.
The Automatic
dispensing button has
not been activated.
The indicator light for the
Automatic dispensing button
will come on when the button
is pressed.
If none of the above is the case, call the Service
Department.
Using automatic liquid
detergent dispensing
does not give the
required result.
Not enough liquid
detergent was
dispensed.
Check whether the opening in
the lid of the container has
become clogged.
The dosage level has
been set too low.
Increase the dosage level and
select a higher degree of
soiling setting, if necessary.
Problem solving guide
47
Comments to this Manuals