Miele W 4449 WPS LIQUIDWASH Operations Instructions download pdf (Page 46)

Fault messages in the display

Problem Possible cause Remedy A

Fault

Check drainage

system

–

The water outlet is

blocked or

restricted.

–

The drain hose has

been fixed too high.

–

Clean the drain filter and

the drain pump.

–

The maximum delivery

head is 1 m.

Fault

Water intake

Open stopcock

The water inlet is

blocked or restricted.

Check whether

–

the stopcock is opened

properly.

–

the inlet hose is kinked.

Waterproof system

activated

Close the stopcock

The water protection

system has reacted.

Call the Service

Department.

;

Technical fault.

Call the Service

Department

There is a fault. Start the programme again.

If the fault message

appears again, contact the

Service Department.

The following flashes in

the display:

Anti-crease

alternately with

Check detergent

Excessive foam has

built up during

washing.

Check:

–

the amount of detergent

used.

–

the dosage level, if using

Automatic dispensing.

Follow the instructions on

the manufacturer's

packaging and also take

the degree of soiling of the

laundry into account.

A To switch off the fault message: Switch the machine off with the I-On/0-Off

button.

Problem solving guide

1 ... 45 46 47 ... 80

Comments to this Manuals

No comments

Miele W 4449 WPS LIQUIDWASH Operations Instructions Page 46

Comments to this Manuals

Related products and manuals for Washing machines Miele W 4449 WPS LIQUIDWASH