Miele W 4449 WPS LIQUIDWASH Operations Instructions download pdf (Page 66)

Connection to the water supply

,

The plastic casing of the safety

valve contains electrical

components. The Waterproof system

must only be connected to its own

stopcock. It must not be connected

to mixer taps or similar and must not

be fitted in areas where there is the

risk of water or other liquids

reaching it.

Do not get wet.

The protective sleeve of the hose

must not be damaged or kinked.

The machine should be connected to

the mains water supply in accordance

with local and national safety

regulations. The German authorities do

not require it to have a non-return valve

as the washing machine has been

designed to comply with DIN

regulations.

The machine is designed to operate

with a flow pressure of between 100

and 1,000 kPa (1-10 bar). If it is higher

than 1,000 kPa it is essential to fit a

pressure reducing valve.

Connection to the mains water supply

should incorporate a mains stopcock

with

3

/

4

" thread. The stopcock should

be fitted by a qualified plumber.

,The connection point is subject

to mains water pressure. Turn on the

stopcock slowly and check for leaks.

Correct the position of the washer

and union if appropriate.

The washing machine is not suitable

for connection to a hot water supply

and connection to a household

water softener is not recommended.

Installation and connection

66

1 ... 65 66 67 ... 80

Comments to this Manuals

No comments