Miele CVA 2660 Operations Instructions download pdf (Page 64)

The descaling procedure will not start for another 5 min

utes or so. This time is needed in order to let the descaling

tablets dissolve fully in the water. It will take longer than

this to start if the appliance is too warm.

During descaling a little water and descaling agent will run

out of the coffee and steam spouts. This is followed by an ac

tivation period, before more descaling agent is drained out,

and so on. A message will appear in the right hand display

letting you know approximately how long this procedure will

take.

When a message asking you to fill the water container

with fresh water appears in the right hand display, you

should remove the container and rinse it out thoroughly with

clean water. Make sure all traces of descaling agent are re-

moved, and then fill it with clean drinking water.

Empty the waste container at the same time.

Water will flow out of both spouts during the rinsing process.

The drip tray will need to be emptied several times during this

process.

When descaling is finished Programme finished, open the

door will appear in the display. Open the appliance front and

follow the instructions given in the right hand display. It is

then ready for use again.

Descaling the appliance

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 83 84

No comments

Miele CVA 2660 Operations Instructions Page 64