Miele PW 6055 Plus Service Manual download pdf (Page 49)

Installation surface

Ensure that the machine feet and

the floor are dry to prevent the

machine from slipping during the

spin cycle.

A concrete floor is the most suitable

installation surface for a washing

machine, being far less prone to

vibration during the spin cycle than

wooden floorboards or a carpeted

surface.

The machine must be level and

securely positioned.

^ To avoid vibrations during spinning,

the machine should not be installed

on soft floor coverings.

If installing on a wooden joist floor:

^ We recommend a plywood base (at

least 70 x 60 x 3 cm) The base

should span several joists and be

bolted to the joists and not only to the

floorboards. Check for the presence

of pipes and cables first.

If possible, install the machine in a

corner, as this is usually the most

stable part of the floor.

Removing the transit bars

These must be removed before the

machine is used for the first time.

^ To remove the left and right covers

1. Use a screwdriver to prise out the

cover as illustrated.

2. Pull the cover forwards to remove.

Using the notched end of the

spanner supplied, turn the left-hand

transit bar 90°, then

Installation and connection

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 59 60

No comments

Miele PW 6055 Plus Service Manual Page 49