Miele PW 6055 Plus Service Manual download pdf (Page 56)

Water drainage

Dump valve version

A motorised dump valve is used to

drain the machine. A DN 70 angle

connector can be used for draining the

machine via an on-site gully (with odour

trap). N.B. If not supplied with the

machine, an angle connector is

available to order from Miele.

Machines with a drain pump

The machine drains via a drain pump

with a delivery head of 1 metre*. The

drain hose must not be kinked as this

restricts drainage. The swivel elbow at

the end of the hose can be turned in

either direction, or can be detached if

required, with a sharp twist and pull.

Drain hose connection:

1. Connected securely to a plastic

drain pipe with a rubber nipple.

There is no need to use a non-return

valve.

2. Connected securely to a standpipe.

3. Connected securely to a floor gully.

If required, the drain hose can be

extended to a length of 5 m. The

necessary parts can purchased from

the Miele Spare Parts Department or

your Miele dealer.

* For a delivery head of more than 1 m

(up to a max. of 1.6 m) a second

duo-drain pump is available with the

corresponding kit from the Miele Spare

Parts Department or your Miele Dealer.

Installation and connection

56

1 2 ... 51 52 53 54 55 56 57 58 59 60

Comments to this Manuals

No comments