The following notes should help you get
to know your coffee machine before
starting to use it.
Controls
This machine has sensor controls which
react to touch. To operate the machine,
you only need to touch the relevant
sensor. There are five sensors:
s On/Off sensor: For switching the
machine on or off
< > Left/right arrows: For scrolling
through the various programme
options
OK Sensor for confirming the
selection of a programme option
and for saving a setting
/ Drink selection sensor (coffee or
espresso)
Display
COSI o Espresso
K1 K2 K3 K 4 K5 L on G k C
The following symbols come up in the
display in the main menu:
K Up to 5 different types of coffee
L Steam
o Hot water
n User profile for up to 9 different
users
G Rinsing
k Descaling
C Settings: Customising your
machine
^
The arrow sensors are used to select
a programme option in the display.
Touch the OK sensor when the option
you want appears highlighted in the
display.
Before using for the first time
The machine must be correctly set
up or installed in its housing unit
(depending on model) and
connected (see "Electrical
connection" and "Installation") before
it is used for the first time. It must
then be cleaned (see "Cleaning and
care").
Remove any protective foil from the
front of the machine.
Switching on
^ Touch the On/Off sensor s to switch
on the machine.
When the machine is being switched on
for the first few times with the master
switch, a welcome screen and some
other messages will appear briefly. The
welcome screen will be displayed each
time the machine is switched on until 5
drinks have been prepared.
Míele Willkommen
Using the coffee machine - first steps
13
Comments to this Manuals