Miele CVA 3650 User Manual download pdf (Page 58)

. . . the coffee is too weak.

^

Make sure that the amount of water

programmed is not too much for the

coffee.

^

Check to see how many coffees have

already been dispensed (see

"Settings: Customising your machine

- Info (showing the number of

drinks)").

If the amount of water is correct, and

approx. 15,000 coffees have already

been dispensed, you will need to

replace the capsule hopper in the

brew unit (see "Cleaning and care -

Maintenance").

. . . there is water in the waste

container.

This is not a fault. The water is left over

from the brewing and cleaning process.

. . . there is residual "coffee water" in

the waste container.

The capsule plate is not pushed in

correctly.

^

Remove the capsule plate and

replace it.

. . . the descaling programme was

started by mistake.

The descaling programme cannot be

cancelled once you have touched the

OK sensor. The programme has to be

completed through to the end. This is a

safety measure to ensure that the

machine is fully descaled, and is

important for the long-term protection of

the machine and to ensure it functions

correctly.

^

Descale the machine (see "Descaling

the machine").

. . . the heating-up time is getting

longer, the amount of water coming

through is incorrect and the machine

is not performing properly.

The machine needs descaling.

^ Descale the machine (see "Descaling

the machine").

Problem solving guide

58

1 ... 57 58 59 ... 68

Comments to this Manuals

No comments