Miele CVA 3650 User Manual download pdf (Page 44)

Drip tray

There is a sensor in the drip tray which

causes a message to appear in the

display when the drip tray is full and

needs to be emptied. Remove the tray

and empty and clean it when this

message appears.

However, to avoid a build-up of odours,

the drip tray should be cleaned every

day.

After running the last rinse you

should leave the drip tray in position

for a while before cleaning it so that

you catch any remaining water from

the system.

Take care when removing the drip

tray as the water can be very hot.

Danger of scalding.

^ Open the machine front, and

carefully remove the drip tray from

the machine.

The grid in the drip tray prevents the

water from spilling out of the tray

when it is being carried.

^

Clean the drip tray and the grid with

hot water and a little washing-up

liquid, or in the dishwasher and dry

with a cloth.

Make sure that the metal contact

discs at the top of the drip tray are

cleaned and dried properly. These

metal discs send a signal to the

machine when the drip tray is full or

if it is not in the machine. The discs

will not convey these messages if

they are dirty or damp.

^ Push the drip tray with the grid along

the right hand edge back into the

machine.

^

Close the front of the machine.

Cleaning and care

44

1 ... 43 44 45 ... 68

Comments to this Manuals

No comments