Miele CVA 3650 User Manual download pdf (Page 28)

Setting Automatic rinsing

To remove any coffee grounds from the

system, the water piping must be

rinsed through before the first drink of

the day is prepared. If Automatic

rinsing is selected, the rinse cycle will

take place automatically whilst the

machine is still cold when the machine

is switched on. This will also pre-heat

the system because hot water is used

for the rinse process. A message will

appear in the display to let you know

what is happening. The machine will

also run an automatic rinse before it

switches off, if it has been used to

prepare a drink.

The machine is delivered with the

Automatic rinsing option set to "On".

To prevent water from

running into the drip tray,

always place an empty cup

under the spout before making the first

drink.

^

Select "Settings F" from the main

menu, and then touch the OK sensor.

^

Touch the right arrow sensor until

"Automatic rinsing" is highlighted and

touch the OK sensor.

^

Touch one of the arrow sensors to

select "On" or "Off" and touch the OK

sensor.

It is a good idea to set this

option to "On" so that the

rinse process cannot be

forgotten.

Setting the Steam system

The machine has two heating systems

which allow you to dispense steam and

coffee at the same time. To save

energy, the steam system can be

switched off if steam is not required all

the time.

When the steam system is

switched off, the machine

can still be used to make

steam, but not at the same time as

making coffee or espresso.

If you operate the steam valve when

the steam system is switched off, the

machine will not produce steam until

it has heated itself up.

The steam heating system remains

active as long as the machine is still

on.

^ Select "Settings F" from the main

menu, and then touch the OK sensor.

^ Touch the right arrow sensor until

"Steam system" is highlighted, and

then touch the OK sensor.

^

Touch one of the arrow sensors to

select "On" or "Off" and touch the OK

sensor.

Settings: Customising your machine

28

1 ... 27 28 29 ... 68

Comments to this Manuals

No comments