Miele CVA 3650 User Manual download pdf (Page 17)

Important: the water piping must be

rinsed through every day and the

machine cleaned thoroughly before

the first drink of the day is prepared.

Rinsing will take place automatically

if the Rinsing programme option has

been set to "On" and the machine is

cold. Hot water will run out of the

spout into the drip tray once the

machine has heated up.

If the Rinsing programme option has

been set to "Off", select "Rinsing" in

the display to rinse out the system

(see "Cleaning and care").

Switching on

^ Touch the On/Off sensor s.

The following message will then

appear:

Heating-up phase

If the automatic Rinsing programme

option has been set to "On" (factory

default setting), the following will

appear after the machine has heated

up:

Rinsing

Water will run out of the spout.

You will hear the capsule carousel

moving into position.

The main menu will then appear in the

display:

COSI o Espresso

K1 K2 K3 K 4 K5 L on G k C

Before preparing the first drink

Filling the system with water

The machine is emptied completely

before it leaves the factory. You must

allow water to be pumped through the

system before the first drink of coffee or

hot water is prepared.

Hot water

K1 K2 K3 K 4 K5 L o n G k C

^

Select "Hot water" with one of the

arrow sensors.

^

Touch the OK sensor.

^ Run some hot water into the cup.

^ Touch the OK sensor again to switch

the water off.

The system is now filled with water, and

the machine is ready to use.

Preparing espresso and coffee

^ Place a cup under the spout.

COSI o Espresso

K1 K2 K3 K 4 K5 L on G k C

^

Select the type of coffee with one of

the arrow sensors.

^

Use the drink selection sensor to

select espresso or coffee.

The type of coffee you have chosen

will appear in the top line of the

display on the right.

Making drinks

17

1 ... 16 17 18 ... 68

Comments to this Manuals

No comments