Miele CVA 3650 User Manual download pdf (Page 66)

Installing a built-in coffee machine

Before installation make sure that

there is no power supply to the

machine. This also applies should it

ever need to be taken out of its

housing unit.

The machine must be built in before

it is operated.

You will need two Allen keys (size 3

and 5) for installing the machine.

^

Push it all the way into the niche until

you feel resistance.

The following only applies when

installing in a tall unit:

^

Check the height of the machine to

make sure that it is sitting centrally in

the niche and that it is level.

If this is not the case, realign the 4

feet underneath the machine using

the large allen key.

The feet can be unscrewed by up to

approx. 10 mm.

For units with 19 mm thick side

walls:

^

If the furniture unit walls are 19 mm

thick you will need to drill four holes

in the sides for securing the machine.

To mark the position of these holes:

–

Align the machine in the niche.

Screw the side socket screws inside

the machine in a little so that they

make indents in the side walls, and

then unscrew them again.

–

Take the machine out of the niche

and drill ø 4.5 mm holes, 2 mm deep

where you made the indentations.

Installation

66

1 ... 65 66 67 68

Comments to this Manuals

No comments