The coffee machine must be
cleaned thoroughly (see "Cleaning
and care") before you fill it with water
and coffee capsules.
It is vital that you programme in
the water hardness level of your
water (see "Customising your
machine - Setting the water
hardness").
Filling the water container
The quality of the water plays
an important part in the
overall quality of the coffee.
The water container should therefore be
emptied and filled with fresh tap water
every day.
Hot water and other liquids could
damage the machine. Only use
cold, clean tap water and fill the
machine every day. Do not on any
account use mineral water. Mineral
water will cause serious limescale
deposits to build up in your machine
and damage it.
^
Open the front of the machine.
^
Lift the water container up and pull it
forwards to remove it.
^
Fill the water container with cold,
clean tap water up to the "Max."
mark.
A valve at the front of the water
container will ensure that water
cannot escape.
^ Push the water container fully back
into the machine.
Filling the machine with water and coffee capsules
15
Comments to this Manuals