Miele G 1222 Operations Instructions download pdf (Page 13)

Water softener

In order to achieve good cleaning

results, the dishwasher needs to

operate with soft water. Hard water

results in the build-up of calcium

deposits on crockery and in the

dishwasher.

Mains water with a hardness level

higher than 0.7 mmol/l (4 °d - German

scale) needs to be softened. This takes

place automatically in the integrated

water softener.

–

The water softener requires

dishwasher salt.

If you use "3 in 1" products in your

dishwasher, you should still add salt

in order to achieve optimum results.

– The dishwasher must be

programmed for the water hardness

in your area.

– Your local water authority will be able

to advise you of the water hardness

level in your area.

Where the water hardness fluctuates

e.g. between 6.7 - 9.0 mmol/l (37 -50 °d

- German scale) always programme the

dishwasher to the higher value

(9.0 mmol/l in this example).

In the event of a fault, it will help the

service technician if you know the

hardness of your local water supply.

^

Enter the water hardness below:

mmol/l or °d

The dishwasher is programmed at

the factory for a water hardness level

of 2.7 mmol/l (15 °d).

If this setting corresponds to the

hardness of your water you do not need

to do anything more.

If your water is harder or softer, you will

need to programme the water hardness

level. See following section.

Before using for the first time

13

Downloaded from DishWasher-Manual.com Manuals

1 ... 12 13 14 ... 64

Comments to this Manuals

No comments