Miele G 1222 Operations Instructions download pdf (Page 50)

Problem Possible cause Remedy

Dishes, cutlery

and glasses are

not dry or are

flecked.

The rinse aid amount may

be insufficient or the rinse

aid reservoir empty.

Replenish the reservoir,

increase the dosage or

change the brand of rinse aid.

See "Before using for the first

time".

Crockery was taken out of

the cabinet too soon.

Leave it in for longer. See

"Operation".

You are using "2 in 1" or

"3 in 1" tablets, which do

not have a strong enough

drying performance.

Set the Tab function (if

present) to "Normal", and

replenish the rinse aid.

The "2 in 1/3 in 1 Tab"

function (if present) is

switched on, even though

tablets are not being used.

Set the Tab function (if

present) to the detergent

product being used (see "Tab

function").

White residue is

visible on cutlery

and crockery,

clouding occurs

on glassware; film

can be wiped off.

Not enough rinse aid was

used.

Increase the dosage. See

"Before using for the first time".

There is no salt in the salt

reservoir.

Fill the salt reservoir. See

"Before using for the first time".

The salt reservoir cap has

not been screwed on

correctly.

Replace it, making sure that it

screws back on correctly.

An unsuitable "2 in 1" or

"3 in 1" tablet has been

used.

Change your detergent. Use a

standard liquid, tablet or

powder detergent, and refill

the salt and rinse aid

reservoirs in the dishwasher.

The water softener is

programmed to a setting

which is too low.

Select a higher water softener

setting. See "Before using for

the first time".

Problem solving guide

50

Downloaded from DishWasher-Manual.com Manuals

1 ... 49 50 51 ... 64

Comments to this Manuals

No comments