Miele G 1222 Operations Instructions download pdf (Page 20)

Setting the rinse aid dosage

You can adjust the rinse aid dosage for

best results.

The rinse aid dosage can be set from

approx. 0-6 ml. It is set to a

recommended setting of approx. 3 ml

at the factory.

If spots appear on crockery and

glassware:

^

Increase the rinse aid dosage.

If clouding or smearing appears on

crockery and glassware:

^ Decrease the rinse aid dosage.

^ Switch the dishwasher off with the

On/Off button s.

^ Press the Start/Stop button in and

whilst holding it in switch the

dishwasher on using the On/Off

button s.

Keep the Start/Stop button pressed in

for at least four seconds until the

"Start/Stop" indicator light comes on.

If this does not happen, start the

procedure from the beginning again.

^

Press the Delay start button three

times.

The "Delay start" indicator will flash

briefly three times at intervals.

p 3 will flash in the display.

This means that the rinse aid dosage

has been set at 3 ml at the factory.

The dosage set will show in the display

after the p.

^

Use the Start/Stop button to select

the rinse aid dosage you want.

The dosage amount alters each time

you press the button.

The programmed rinse aid dosage is

now stored in memory.

^ Switch the dishwasher off with the

On/Off button s.

Before using for the first time

20

Downloaded from DishWasher-Manual.com Manuals

1 ... 19 20 21 ... 64

Comments to this Manuals

No comments