Miele G 1222 Operations Instructions download pdf (Page 37)

Factory default setting

If you have altered any settings from

the factory default, you can re-set them

back to the factory default settings as

follows:

^

Switch the dishwasher off with the

On/Off button s.

^

Press the Start/Stop button in and

whilst holding it in switch the

dishwasher on using the On/Off

button s.

Keep the Start/Stop button pressed in

for at least four seconds until the

Start/Stop indicator light comes on.

If this does not happen, start the

procedure from the beginning again.

^ Press the Delay start button twelve

times.

The Delay start indicator light will give

one long flash and two brief flashes at

intervals and "p 0" or "p 1" will flash in

the display.

The characters flashing in the display

show whether a setting other than the

factory default setting has been set.

–

"p 1": All settings are set to factory

default settings.

–

"p 0": At least one setting has been

changed.

^

Press the Start/Stop button if you

wish to re-set all the factory default

settings.

^

Switch the dishwasher off with the

On/Off button s.

Operation

37

Downloaded from DishWasher-Manual.com Manuals

1 ... 36 37 38 ... 64

Comments to this Manuals

No comments