Miele G 1222 Operations Instructions download pdf (Page 46)

The dishwasher does not fill/drain

Problem Possible cause Remedy

The Inlet/Drain

check indicator

flashes.

The stopcock is

closed.

Open the stopcock fully.

The dishwasher

stops during a

programme.

The Inlet/Drain

check indicator

flashes.

Fault code FXX

shows in the display.

Before rectifying the problem

you must:

–

Switch the dishwasher off with

the On/Off button s.

Fault F12/F13:

Water inlet restricted.

–

Open the stopcock fully.

–

Clean the water inlet filter (see

"Problem solving").

– The water pressure at the

intake is lower than 30 kPa

(0.3 bar).

Seek professional advice.

Fault F11:

Water outlet is

restricted, water

remains in the wash

cabinet at the end of a

programme.

– Clean the filter combination.

See "Cleaning and Care".

– Clean the drain pump. See

"Problem solving".

– Clean the non-return valve.

See "Problem solving".

–

Remove any kink in the drain

hose.

Problem solving guide

46

Downloaded from DishWasher-Manual.com Manuals

1 ... 45 46 47 ... 64

Comments to this Manuals

No comments