Miele G 1222 Operations Instructions download pdf (Page 52)

Cleaning the water inlet filter

A filter is incorporated in the screw

connection of the valve on the water

inlet hose. The filter must be cleaned

when dirty, otherwise insufficient water

flows into the wash cabinet.

,

The plastic housing of the water

connection contains an electrical

component. It must not be dipped in

water.

Recommendation

If the mains water contains a large

number of insoluble substances, we

recommend fitting a large-area filter in

the connection between the stopcock

and the water inlet hose threaded

union. This filter is available from the

Miele Spares Parts dept.

Cleaning the filter:

^ Disconnect the dishwasher from the

mains supply. Switch off at the mains

socket and withdraw the plug.

^

Turn off the stopcock.

^

Unscrew the inlet hose.

^

Carefully remove the seal.

^ Withdraw the filter using pointed

pliers and rinse clean under running

water.

^ Replace the filter and seal, making

sure they are sitting correctly.

^ Reconnect the inlet hose to the

stopcock, making sure it goes on

correctly and is not cross-threaded.

^

Turn on the stopcock gradually to test

for leaks. If there is a leak, the inlet

hose might not be on securely, or it

may have been screwed on at an

angle. Unscrew and reconnect the

water inlet valve correctly.

Problem solving

52

Downloaded from DishWasher-Manual.com Manuals

1 ... 51 52 53 ... 64

Comments to this Manuals

No comments