Miele G 1222 Operations Instructions download pdf (Page 59)

Connection to the water supply

,

Water in the dishwasher must

not be used as drinking water.

–

The dishwasher may be connected

to a cold or hot water supply, max.

60 °C. We would only recommend

connection to a hot water supply if it

is economical, e.g. a solar powered

supply. When connected to a hot

water supply all programme stages

which would otherwise be carried out

with cold water will be carried out

with hot water.

– The inlet hose is approx. 1.5 m long.

A 1.5 metre long flexible metal

extension hose, pressure tested to

14000 kPa/ 140 bar, is available as

an optional accessory if required.

– A stopcock with a 3/4 " male thread

must be provided on site.

– This appliance is constructed to

comply with IEC/EN/DIN 61770 //

VDE 0700 Section 600, and may be

connected to a suitable supply

without an extra non-return valve if

national regulations permit.

–

The water pressure (flow pressure at

the take-off point) must be between

30 and 1000 kPa (0.3 and 10 bar).

If the water pressure is too high, a

pressure reducing valve must be

fitted.

!The inlet hose must not be

shortened or damaged in any way

as it contains electrical components

(see illustration).

Plumbing

59

Downloaded from DishWasher-Manual.com Manuals

1 ... 58 59 60 61 62 63 64

Comments to this Manuals

No comments