Miele G 1772 Operations Instructions download pdf (Page 11)

The more coolant there is in an appliance, the larger the room it

should be installed in. In the event of a leakage, if the appliance is in

a small room, there is the danger of combustible gases building up.

For every8gofcoolant at least 1 m

of room space is required. The

amount of coolant in the appliance is stated on the data plate inside

the appliance.

Before connecting the appliance, make sure that the connection

data on the data plate (fuse rating, voltage and rated load) match

the mains electricity supply. This data must correspond in order to

avoid the risk of damage to the appliance.

Consult a qualified electrician if in any doubt.

The electrical safety of this appliance can only be guaranteed

when continuity is complete between it and an effective earthing

system. It is most important that this basic safety requirement is

present and tested regularly and, where there is any doubt, the

household wiring system should be inspected by a qualified

electrician.

If the connection cable is faulty, it must only be replaced by a

Miele approved service technician to protect the user from danger.

Do not connect the appliance to the mains electricity supply by a

multi-socket unit or an extension lead. These do not guarantee the

required safety of the appliance (e.g. danger of overheating).

If moisture gets into electrical components, it could cause a short

circuit.

Therefore, do not operate this appliance in areas which are exposed

to moisture.

This appliance must not be installed and operated in mobile

installations (e.g. on a ship).

Warning and Safety instructions

1 ... 10 11 12 ... 84

No comments

Miele G 1772 Operations Instructions Page 11