Miele G 1772 Operations Instructions download pdf (Page 47)

Information in the display

Problem Possible cause Remedy

The alarm symbol ;

flashes in the

display.

The temperature in the

freezer has risen higher or

fallen lower than the

temperature which has

been set. This could be due

to:

–

the appliance door has

been opened frequently.

–

a large quantity of food

was placed in the freezer

section at once without

switching on

SuperFreeze.

– the power was cut for a

long time.

^

Remedy the alarm. The

alarm symbol ; will

disappear and the

audible tone will stop.

Depending on the

temperature, check

whether the food has

defrosted or started to

defrost. If this is the case,

cook the food before

freezing again.

The warning tone

sounds and the

power cut symbol t

appears in the

display.

The temperature

display will show the

warmest

temperature

recorded in the

freezer during the

power cut or

interruption to the

power supply.

The temperature in the

appliance in the previous

days or hours has risen too

high because of a power

cut or interruption to the

power supply.

The appliance will go back

to the last temperature

setting when the power is

back on.

^ Touch the alarm off

sensor.

The warmest temperature

will be deleted. The display

will then revert to showing

the current temperature in

the freezer.

^

Depending on the

temperature displayed,

you should check the

condition of food in the

freezer. If it has defrosted

or started to defrost,

check that it is still safe to

use and, if so, use it as

soon as possible.

Defrosted food may only

be refrozen after it has

been cooked.

Problem solving guide

47

1 ... 46 47 48 ... 84

Comments to this Manuals

No comments