Miele G 1772 Operations Instructions download pdf (Page 57)

This appliance must be built in,

otherwise it could tip up.

Side-by-side units:

FNS 35402 i, FNS 37402 i freezers have

two foamed in side-wall heaters

enabling them to be installed

side-by-side with other appliances.

Each appliance must be installed in its

own niche.

Please contact Miele for information

on which combinations are suitable

for your appliance.

Location

This appliance should be installed in a

dry, well-ventilated room. It should not

be installed where it is exposed to

direct sunlight or directly adjacent to a

heat-producing appliance such as an

oven or a radiator. The room

temperature should not go above or

below the climate range for which the

appliance is designed. The higher the

ambient temperature of the room, the

more energy the appliance requires to

operate.

Please note the following when

installing the appliance:

–

The mains connection socket must

not be located directly behind the

appliance and must be easily

accessible.

–

The plug and mains connection

cable must not come into contact

with the rear of the appliance as they

may be damaged by vibrations from

the appliance.

–

Nor should other appliances be

plugged into a socket located

directly behind this appliance.

Important! tropical / humid

environments

During periods of high humidity,

some condensation may appear on

outside surfaces of the appliance,

which may lead to corrosion on the

external walls. For prevention, it is

advisable to install the appliance with

sufficient ventilation in a dry and/or

an air-conditioned room.

Please ensure that doors are closing

and sealing properly. Please ensure

that the appliance is installed in

accordance with these installation

instructions and that the handle is

fitted correctly. Should you require

further assistance, please contact

Miele.

Installation advice

57

1 ... 56 57 58 ... 84

Comments to this Manuals

No comments