Miele G 1772 Operations Instructions download pdf (Page 22)

Setting the temperature

^

Use both sensors underneath the

display to set the temperature.

By touching

–

the down arrow, the temperature

decreases

– the up arrow, the temperature

increases

While the temperature is being set, the

temperature value will flash.

When you tap the sensors, you will see

the following changes in the display:

– When first tapped: The last

temperature selected flashes.

–

Each subsequent touch of a sensor:

The temperature is adjusted in 1 °C

steps.

–

Leaving a finger on the sensor: The

temperature changes continuously.

Approximately 5 seconds after you

release the sensor, the actual

temperature in the appliance will be

displayed.

When you have adjusted the

temperature, wait for approx. 6 hours

if the appliance is not very full and for

approx. 24 hours if the appliance is

full before checking the temperature

display, as it will take this long for the

appliance to reach the temperature.

If, after this time, the temperature is still

too high or too low, you will need to

adjust it again.

Temperature range

The temperature can be adjusted

between -15 °C and -28 °C.

The correct temperature

22

1 ... 21 22 23 ... 84

Comments to this Manuals

No comments