Miele G 1772 Operations Instructions download pdf (Page 59)

–

The ventilation cross-sections in the

plinth, housing unit and above the

appliance must amount to at least

200 cm

2

to ensure that air can

circulate without hindrance.

–

The larger the ventilation

cross-sections, the more energy

efficient the appliance operates.

The air inlet and outlet must not be

covered or blocked in any way.

They should be dusted on a regular

basis.

Top ventilation cross-section

The top ventilation cross-section can be

achieved in various ways:

a Directly above the appliance with a

ventilation grille (free passage of at

least 200 cm

2

).

b Between furniture units and the

ceiling.

c In an intermediate ceiling.

Before installation

^

Before installation, remove the

accessories bag containing

installation components and

accessories from the appliance, and

remove the sealing strip from the

appliance door.

^

Do not remove the following from the

rear of the appliance:

– The spacers (depending on model).

These ensure the gap required

between the back of the appliance

and the wall is maintained.

– The bags (depending on model)

located inside the metal grille (heat

exchanger).

These are important for the correct

functioning of the appliance. Their

contents are non-toxic and are not

dangerous.

^

Remove any cable clips from the

back of the appliance.

^

Check that all parts at the back of the

appliance are unhindered. Carefully

remove any hindrance.

Installation advice

59

1 ... 58 59 60 ... 84

Comments to this Manuals

No comments