Miele G 7804 Operations Instructions download pdf (Page 27)

Note

^

Load items so that water will come

into contact with all surfaces. This

ensures that they will be properly

cleaned.

^

Do not place items to be cleaned

inside other pieces where they may

be concealed.

^

Hollow vessels should be inverted

and placed in the correct inserts. The

water must be able to access them

unhindered.

A cover net can be used to reduce

the risk of movement during the wash

process and prevent glass

breakages.

^ Petri dishes and similar should be

placed in the correct insert with the

soiled side facing the centre.

^ Pipettes should be placed with the

mouthpiece facing upwards.

^ Deep sided items should be placed

at an angle so that water can run off

them unhindered.

^

Tall, narrow pieces should be placed

in the centre of the baskets This

ensures good coverage of water.

^

Mobile units with adapters must

engage correctly (see next page).

^

The spray arms must not be blocked

by items which are too tall or which

hang down in their path. If necessary,

manually rotate the arms to test.

Important:

Make sure that the water connection

spring adapter engages correctly when

a basket or injector unit is inserted in

the machine. It must be 4-5 mm higher

than the water connection inlet in the

machine. If it is not:

^

Loosen the lock ring.

^

Push up the adapter (4-5 mm higher

than the water connection inlet in the

machine) and tighten up the lock

ring.

Select baskets and inserts which are

appropriate for the application.

See examples on the following pages

Loading the machine

27

1 ... 26 27 28 ... 60

Comments to this Manuals

No comments