Miele G 7804 Operations Instructions download pdf (Page 50)

,

All electrical work must be

carried out by a suitably qualified

and competent person in

accordance with local and national

safety regulations (BS 7671 in the

UK).

–

Connection should be made via a

suitable isolator, with an on-off switch

which should be easily accessible for

servicing work.

–

For extra safety it is advisable to

install a suitable residual current

device. Contact a qualified electrician

for advice.

WARNING

THIS APPLIANCE MUST BE

EARTHED

– Equipotential bonding should be

carried out.

Bonding connection

There is a screw connection point

marked with the earth symbol (

8)at

the back of the machine, to which the

earth lead must be connected.

For technical data see data plate or

wiring diagram supplied.

The machine must only be operated

with the voltage, frequency and fusing

shown on the data plate.

This machine can be converted in

accordance with the conversion

diagram and wiring diagram supplied.

The conversion diagram and data

plate with test certification (VDE, DVGW

etc.) is located on the rear of the

machine, and on the plinth (behind the

service panel).

– The wiring diagram is secured to

the inner side of the service panel.

50

Electrical connection

1 ... 49 50 51 ... 60

Comments to this Manuals

No comments