Miele G 7804 Operations Instructions download pdf (Page 53)

,

The inlet hose must not be

shortened or damaged in any way

(see illustration).

See also the installation diagram

supplied.

AD-water connection (pressurised)

>50-1000 kPa (0.5-10 bar)

The machine is supplied as standard

for connection to a supply system of

0.5 - 10 bar (50 - 1000 kPa). If the water

flow pressure is below 2 bar (200 kPa)

the fill time is automatically extended.

–

The AD pressure tested hose

(marked "H

2

O pur") with a 3/4"

threaded union must be connected

to the on-site AD stopcock for

purified water.

If the AD water connection is not

going to be used, the electronics will

need to be reprogrammed by a

Miele Service Technician. The inlet

hose will remain on the rear of the

machine.

AD water connection (non-pressu-

rised) 8.5 - 50 kPa (0.085 - 0.5 bar)

- Option -

NOTE:- NON Pressurised is Standard

for Models Sold in Australia.

Optional connection all other

countries.

The appliance has to be converted for

connection to 8.5 - 50 kPa if this was

not done at the factory (special

version). The installation of a feed

pump should only be carried out by

Miele Service.

When the AD water container is

non-pressurised, the tank outlet has

to be at least the height of the upper

edge of the machine (see installation

instructions).

Plumbing

53

1 ... 52 53 54 55 56 57 58 59 60

Comments to this Manuals

No comments