Miele KM 5816 User Manual Page 1

Operating and installation instructionsCeramic hobsKM 5801KM 5813 / KM 5816KM 5822To avoid the risk of accidents ordamage to the appliance it isessent

Cooking zonesZone KM 5801C in cm Rating in watts for 230 Vy 18.0 1800w 14.5 1200x 21.0 2200z 14.5 1200Total: 6400Zone KM 5813 / KM 5816C in cm Rating

This appliance complies with allrelevant local and national safetyrequirements. Inappropriate usecan, however, lead to personal injuryand damage to pr

Safety with children~Use the safety lock to preventchildren operating the appliance oraltering the settings.~Keep children away from theappliance at a

Technical safety~Before installation, check theappliance for visible signs of damage.Do not install and use a damagedappliance. It could be dangerous.

~Do not connect the appliance to themains electricity supply by amulti-socket adapter or an extensionlead. These do not guarantee therequired safety o

~Do not flambé under a cooker hood.The flames could set the cooker hoodon fire.~Do not use the appliance as aresting place for anything else. Whenthe

~When using an electrical appliance,e.g. a hand-held food blender, near theappliance, ensure that the cable of theelectrical appliance cannot come int

Disposal of the packingmaterialThe transport and protective packinghas been selected from materials whichare environmentally friendly fordisposal, and

Please stick the extra data plate for the appliance suppliedwith this documentation in the space provided in the "Aftersales service, data plate&

Single circle cooking zones have one heating element, whilstdouble circle (vario) cooking zones and extended zones havetwo. Depending on model, the he

2

How the hob is operatedThe hob is equipped with electronic sensor controls whichreact to finger contact.To operate the hob, touch the relevant sensor.

Switching onThe hob must be switched on before any of the zones can beused.Do not leave the appliance unattended whilst it is beingused.To switch the

Power level rangeThe appliance is delivered with 9 power levels programmed in. If you wish to finetune a setting, you can extend the power level range

Auto heat-upWhen Auto heat-up has been activated, the cooking zoneswitches on automatically at the highest power setting andthen switches to the conti

Continuedcooking setting*Heat-up timein minutes and seconds (approx.)1 1:201. 2:002 2:452. 3:253 4:053. 4:454 5:304. 6:105 6:505. 7:106 1:206. 2:007 2

Switching the outer circle of a double circle / extended zone onand offWhen cooking with larger pans, the outer circle of a doublecircle/extended zone

Switching off and residual heat indicatorsSwitching off a cooking zone^Touch the sensor for selecting the cooking zone you wanttwice.A 0 will flash in

–Most suitableThe best pans for use on a ceramic hob are those with athick base which is very slightly concave when cold. Whenheated, the base flatten

–Check that the diameter of the pan base is wide enoughfor the cooking zone so that heat is not lost unnecessarily.too small suitable–Use a pan lid wh

The hob must be switched on to use the timer.The timer can be used for two different functions:–to set the minute minder–to set a cooking zone to swit

Guide to the appliance ...5Models ...5KM 5801 ...

Minute minderTo set the minute minder timeMinutesExample: You want to set 15 minutes.^Switch the hob on.^Touch the m sensor.00 will appear in the time

HoursWhole hours are set by touching the relevant number on thenumerical keypad.Half hours are set by touching the area between the relevanttwo number

To change the minute minder time^Touch the m sensor.^Set the time you want, as described above.To delete the minute minder time^Touch the m sensor unt

To switch a cooking zone off automaticallyYou can set a time at the end of which a cooking zone willswitch off automatically.All the cooking zones can

To use both timer functions at the same timeThe minute minder and automatic switch-off functions can beused at the same time.If you have programmed in

Safety lock / System lockKeep children away from the hob for their own safety.Your appliance is equipped with a safety lock to prevent thehob and the

Stop and GoYour appliance has a Stop and Go feature which, whenactivated, reduces the power of all cooking zones in use topower level 1. When Stop and

Safety switch-offSafety switch-off with an over-long cooking timeIf one of the cooking zones is heated for an unusually longperiod of time (see chart)

Overheating protectionEach zone is equipped with overheating protection (internaltemperature limiter). This switches off the heating elements inthe co

For Miele branded cleaning and conditioning products see"Optional accessories".,Do not use a steam cleaning appliance to clean thisappliance

Safety features ...35Safety lock / System lock ...35Stop and G

Do not use washing-up liquid to clean the ceramic surface.Washing-up liquid will not remove all soiling and deposits.It will form an invisible coating

You can change the default settings of programme options(see chart). Several settings can be altered in succession.After programming mode has been cal

Programme* Status** SettingP00Demonstration mode andfactory default settingsS 0 Demonstration mode on(after the hob is switched on, "dE"will

Programme* Status** SettingP07System lock S0 Manual activation of the systemlockS 1 Automatic activation of thesystem lockP08Auto heat-up S 0 OffS1 On

With the help of the following notes, minor faults in the performance of theappliance, some of which may result from incorrect operation can be put ri

Problem Possible cause RemedyAfter the hob isswitched on "dE"appears in the timerdisplay for a fewseconds.The cooking zones donot heat up.Th

Problem Possible cause RemedyThe hob switches offwhile it is in use, an Fflashes in the timerdisplay and a tonesounds.One or more of thesensors have b

Problem Possible cause RemedyThe sensors areover-sensitive or do notreact at all.The sensitivity level ofthe sensors haschanged.Make sure that there i

You can test the power level of a cooking zone by measuringhow long it takes to bring a specific amount of water to theboil.The pan (and lid) must be

C Cooking zonein cmRating in watts for230 VQuantity of waterin litresTime* inminutes10.0 600 0.5 11.012.0 700 / 750 1.0 13.014.5 1000 / 1100 1.0 9.014

ModelsKM 5801abcd Single circle zonese Control panelGuide to the appliance5

Miele offer a comprehensive range of useful accessories aswell as cleaning and conditioning products for yourappliance.These products can be ordered o

The appliance must only be installedand connected to the electricitysupply by a suitably qualified andcompetent person in strictaccordance with curren

Safety distance above an interimshelfIt is not necessary to fit an interim shelfunderneath the hob.If an interim shelf is fitted underneaththe hob, a

Safety distances to the sides andback of the hobIdeally the hob should be installed withplenty of space on either side. Theremay be a wall at the rear

Safety distance when installing the appliance near a wall with additionalniche claddingA minimum safety distance must be maintained between the workto

Hob with frame or bevellededgesSeal between the hob and theworktopThe sealing strip under the edge of thetop part of the appliance provides asufficien

KM 5801a Spring clampsb Casing depthc Building-in depth including mains connection box.Mains connection cable, L = 1440 mmd FrontBuilding-in dimension

KM 5813a Spring clampsb Casing depthc Building-in depth including mains connection box.Mains connection cable, L = 1440 mmd FrontBuilding-in dimension

KM 5816a Spring clampsb Casing depthc Building-in depth including mains connection box.Mains connection cable, L = 1440 mmd Fronte Safety bracketBuild

KM 5822a Spring clampsb Casing depthc Building-in depth including mains connection box.Mains connection cable, L = 1440 mmd FrontBuilding-in dimension

KM 5813 / KM 5816a Double circle zonebd Single circle zonesc Extended cooking zonee Control panelGuide to the appliance6

The exact positions of the springclamps, and the safety brackets forhobs with bevelled edges, are shownin the building-in dimensions for theparticular

Granite and marble worktopsYou will require double-sided tapeand silicone (not supplied).^Fix the spring clamps (or safetybrackets for hobs with bevel

Installing the hob^Feed the hob connection cable downthrough the cut-out.^Position the hob on the springclamps.^Using both hands, press downevenly on

All electrical work should be carriedout by a suitably qualified andcompetent person, in strictaccordance with current local andnational safety regula

The electrical safety of this appliancecan only be guaranteed whencontinuity is complete between it andan effective earthing system, whichcomplies wit

In the event of any faults which you cannot remedy yourself, or if the appliance isunder guarantee, please contact:–Your Miele dealer, or–the Miele Se

66

67

Alteration rights reserved / 0811M.-Nr. 07 570 890 / 02

KM 5822a Double circle zonebd Single circle zonesc Extended cooking zonee Control panelGuide to the appliance7

Control panelGuide to the appliance8

Sensors fora Switching the hob on and offb Numerical keypad- For setting the power level- For setting the timec Safety lockd Switching on the outer ci