Miele KM 5816 User Manual download pdf (Page 41)

You can change the default settings of programme options

(see chart). Several settings can be altered in succession.

After programming mode has been called up, P (Programme)

and S (Status) will appear in the timer display. On hobs with 3

cooking zones, an additional indicator will appear at the rear

left.

The programme is shown in the cooking zone displays at the

front left and rear left. Example:

Programme 03 = front left 0, rear left 3

Programme 14 = front left 1, rear left 4

The status is shown in the front right cooking zone display.

To call up programming mode

^ With the hob switched off, touch the s and $ sensors at

the same time until the safety lock indicator lamp flashes.

To set the programme setting

^ To set the units position first touch the sensor for selecting

the rear left cooking zone and then touch the relevant

number on the numerical keypad.

^ To set the tens position first touch the sensor for selecting

the front left cooking zone and then touch the relevant

number on the numerical keypad.

To set the status setting

Touch the sensor for selecting the front right cooking zone

and then touch the relevant number on the numerical

keypad.

To save settings

Touch the s sensor until all the displays go out.

To not save settings

Touch the $ sensor until all the displays go out.

Programming

1 ... 40 41 42 ... 68

No comments

Miele KM 5816 User Manual Page 41