Miele H 5981 Operations Instructions download pdf (Page 45)

Evaporate residual moisture

If there is still water in the steam

injection system at the end of a

programme or if the programme is

cancelled, you will be prompted to

evaporate the residual moisture.

If you confirm the prompt immediately

with OK, the oven will heat up to

approx. 150 °C and the residual water

will evaporate.

How long this takes will depend on the

amount of water in the system.

If you select "Cancel", the evaporation

of the residual water will not start imme-

diately.

However, you will then only be able to

run functions and Automatic

programmes without Moisture plus.

The evaporation of the residual water

process must be carried out before you

can use an Automatic programme with

Moisture plus or the Moisture plus

function.

Descaling

The oven will need to be descaled

depending on the number of cooking

programmes using Moisture plus which

have been run and the amount of water

taken into the oven for these.

The frequency of descaling also

depends on the water hardness level in

your area.

A message to tell you to descale the

appliance will appear in the display.

You can start the descaling process at

any time by selecting "Descale" in the

main menu.

If you do not carry out the descaling

process when the prompt to descale

the oven appears, you will only be able

to run functions and Automatic

programmes without Moisture plus.

See "Cleaning and care" for more

information about descaling.

Moisture plus

45

1 ... 44 45 46 ... 84

Comments to this Manuals

No comments