Miele PT 7135 C Service Manual download pdf (Page 50)

Remedy

A Check the condensate pump (M13). Exchange it if necessary.

A PT 7135 C and PT 7136: Service mode, see Service mode summary, 080 4.5.

A PT 5135 C and PT 5136: Service mode, see Service mode summary, 080 4.6.

Cause

The condensate drainage path is blocked.

Remedy

A Check the drainage path for blockages. Repair as necessary.

3.6 Fault indication: Clean the airways

Symptom

The programme continues normally or is interrupted.

The fault is indicated at the end of the cooling down phase.

The fault is saved in the fault memory, see Fault code F66, air leakage fault, 080

3.19.

PT 7135 C and PT 7136: This warning is cancelled when the door is opened.

Cause

Air paths are clogged.

Insuf ficient air flow registered, see 080 2.3 Insufficient air flow measurement.

Remedy

Note

Check and clean the filters regularly, see the operating instructions.

A Clean the fluff filters in the door cap and door fill ring.

A Condenser dryer: Remove the heat exchanger and clean it.

A Check and clean the air paths.

Descriptive Technical Documentation

080-14 DTD no. 521-7135

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 87 88

No comments

Miele PT 7135 C Service Manual Page 50