Miele H 373 Pyrolytic Operations Instructions download pdf (Page 61)

In the case of severe soiling the pyro-

lytic process is interrupted. Remove

large pieces of debris before starting

the pyrolytic process again.

The end of the pyrolytic process is

shown

– by the "p" symbol flashing, and

– by an audible tone

once the oven has cooled to a tempera-

ture below 280°C and the door lock

has been released.

After the pyrolytic process pyrolytic

debris (e.g, ash), which can build up

according to the level of soiling, can

easily be removed.

Only remove debris when the oven

has cooled. Danger of burning!

Most debris can be removed with a

damp cloth. Depending on the level of

soiling, in certain circumstances a

clearly visible film can build up on the

oven door, on the panel and under the

guard. This can be removed with a

shielded blade scraper or a non-ab-

rasive sponge and a mild solution of

warm water and washing-up liquid.

Spilt fruit juices may cause lasting

discolouration of the surfaces and

roasting can cause matt areas to ap-

pear. This discolouration is perma-

nent but will not affect the efficiency

of the enamel. Do not attempt to

remove these marks.

You can delay the start of the pyro-

lytic process for example, to take

advantage of cheaper night electricity

tarifs.

In order to do this, start the pyrolytic

process and use the "f" button to

delay the start of the process.

As soon as the start delay is taken up,

– "PYRO" goes out in the display

– the "p" symbol lights up.

When the pyrolytic process starts,

"PYRO" lights up in the display.

The pyrolytic process is interrupted,

– if the function selector is turned to

the "0" position.

– if another function is selected during

the pyrolytic process.

– in the event of a power cut.

The oven door remains locked in the

case of an interruption.

The door will only open again when the

oven temperature has fallen below

280°C and the function selector has

been turned to the "0" position and then

to "Light H". The "p" symbol lights up in

the display.

When, after approx. 30 seconds, the "p"

symbol flashes, the door can be opened.

If the heat-up phase of the pyrolytic

process interrupts independently,

the error message "F 15" appears in the

display.

The door will open only when the oven

temperature has fallen below 280 °C

and the function selector has been

turned to the "0" position and then to

"Light H".

After approx. 60 seconds the error

message goes out and "PYRO" and the

"p" symbol light up in the display.

When after approx. 30 seconds, the

"p" symbol flashes, the oven door can be

opened.

Cleaning and care

61

1 ... 60 61 62 ... 84

Comments to this Manuals

No comments