Miele H 373 Pyrolytic Operations Instructions download pdf (Page 65)

Correcting minor faults

Installation, maintenance and re-

pairs to the electrical components

of this appliance should only be car-

ried out by a suitably qualified and

competent person in accordance

with national and local safety requla-

tions. Repairs and other work by un-

qualified persons could be dan-

gerous. The manufacturer cannot

be held responsible for unauth-

orised work.

Some minor problems however can be

dealt with as follows:

What to do if . . .

. . . the oven does not heat up.

Check whether,

the selector switch is set to the func-

tion required, and the temperature

control is set at the correct tempera-

ture.

the operating lock is activated.

the mains fuse has blown. Contact a

qualified electrician or the Miele Ser-

vice Department.

. . . the heating elements work, but

not the oven lighting.

Make sure the halogen lamp is con-

nected properly in its socket.

If after checking it, it still does not work

you will need to change it:

Disconnect the appliance from the

electricity supply. Switch off at the

isolator or the mains fuse box.

There is a slide access flap on each

side trim of the oven.

Slide the relevant access flap up-

wards.

Pull out the metal strip.

Replace the halogen lamp:

12 V, 20 W,

heat resistant up to 300°C, G4

socket, Osram, Type 64428.

Correcting minor faults

65

1 ... 64 65 66 ... 84

Comments to this Manuals

No comments